Current location: Home > Products > Soot blower >Rake soot blower

HX-C25SLRake soot blower

Soot blower HX-C25SL

Speed
1400r.p.m
Working pressure
≤2Mpa
Scope of application
To purge the reactor catalyst dust, the soot blower operates in a reciprocating motion, multiple nozzles are installed on the rake tube, and steam is purged downward.
Main features
The weight of the sootblower does not include the weight of the extended part of the sootblower barrel and the supporting plate in the furnace.

Product Introduction

The Rake soot blower is mainly used to purge the soot accumulated on the reactor catalyst. The operation mode of the soot blower is reciprocating motion. Multiple nozzles are installed on the rake tube, and steam is purged downward.

Customized solution Rake soot blower Model

Product advantages

Fully automatic and safe operation:

Soot blower IoT + remote control + expert management
System thermal efficiency＞100%:

The corrugated furnace + threaded smoke pipe improves heat transfer efficiency, and
the economizer and condenser reduce the exhaust temperature
Convenient operation and maintenance:

Advanced control system enables unattended operation
Environmental protection and energy saving:

Adopt low-nitrogen burner and advanced low-nitrogen combustion technology,
NOx emission ≤30mg/Nm³

Product Parameters

Blowing travel	HX-C25SL≤3.8 meters
Purge mode	vertically downward
Medium	steam or compressed air
Soot blower advance and retreat speed (m/min)	0.853(commonly used)
Blowing radius	~1.5
Blowing arc	14°
Adaptabe temperature	600℃
Motor type,power	JS90EL-4 B5 type/1.5KW1400r.pm
Motor power supply	380V3P 50HZ
Sootblower weight(about)	360+116xT (stroke, meters)